Factors to Consider Before Choosing a Class B Autoclave

As we have seen, for our dental clinic, we will need a Class B autoclave that allows us to sterilize instruments such as turbines or bagged contra-angles 1:5 multiplier. However, when choosing one or the other model, we must take into account the following points:

Sun® SUN-II-DL Dental Autoclave Sterilizer Vacuum Steam 18-23L
SUN-II-DL 23l

Capacity of the autoclave: Class B autoclaves are manufactured with different capacities, ranging from 8 liters to 24 liters. The more capacity the autoclave has, the more instruments we can sterilize in each cycle, but the more energy it spends in each sterilization cycle. The price of the autoclave will also be proportional to its capacity. Therefore, we must adjust the autoclave’s capacity to our needs, as it makes no sense to purchase an autoclave of much greater capacity than we really need. This will save us money on the purchase and daily use. In addition, it is often more convenient to have two autoclaves smaller than a larger, because in this way we can perform two simultaneous sterilization cycles.


Duration of the sterilization cycle: It is always practical to look at how long it takes for each autoclave to perform a complete sterilization cycle. There are quick-cycle autoclaves, which saves time in autoclaving processes, although the price is usually a bit higher.


Warranty and Technical Service: Another important point to consider when choosing a dental autoclave is warranty and technical service. The vast majority of autoclaves have a warranty of one to two years, and if the autoclave brand does not have its own technical service, the most appropriate thing will be to look for a trustworthy multibrand technical service that can repair it. if one day we need it. Another benefit of having two autoclaves in the dental clinic will be that we will always have an autoclave available if we have to repair one of the two
Autoclave Price: The price of the autoclave will normally be closely related to its reliability and characteristics. European or American brands usually offer high quality autoclaves, while Chinese or Korean brands offer economical autoclaves of a quality that may be sufficient for a small dental clinic. The main disadvantage of these “cheap dental autoclaves” is that the technical service and after-sales service will surely be less advantageous and more complicated
Accessories: Class B autoclaves can incorporate accessories that will be very useful in some cases. For example, there are autoclaves with printers, which will facilitate the traceability of sterilized products.

What should take into consideration when choosing a dental autoclave?

How to choose dental micro motor fit for your clinic?

How to Purchase Portable Dental Delivery Unit with Compressor

Portable dental equipment options are available from a variety of dental equipment companies. These companies range from larger multi-product businesses to smaller companies whose only product may be an item of portable dental equipment. Several manufacturers will have a variety of portable equipment options. Many companies have been selling and re-engineering their products for many years, while others may have just recently entered the portable dental marketplace.

Starting your own dental practice is no easy task. Purchasing portable dental equipment for your practice can also be difficult. On average, a new dental practice will spend around $200,000 on structural upfit, equipment and supplies for their business. To make sure you are getting the most for your money, consider the following tips before diving into the world of dental equipment sales.

Do your research

Before making any final decisions and purchasing dental equipment for sale, do as much research as possible on your own first. Doing so will help you understand all that the market has to offer and what your options are.

It is never a good rule of thumb to buy something simply because it is available or because it is affordable for you. Find out exactly what your practice needs and then begin your research on the quality products to invest in. This is because buying portable dental equipment is just that, an investment. Check the product’s features and confirm how it will make your practice more effective.

Find a reputable Brand

As good as a deal that company you don’t recognize or haven’t seen any reviews on may offer, do not buy from them unless you are sure the decision is right for you.

Choose a manufacturer who has an established reputation and has been in business for a number of years. These companies have the knowledge and experience to help recommend the best products. This also benefits you because they know exactly how each product functions and how it benefits the different dental practices.

Choose quality first

With so many different models and manufacturers to choose from, you want to make sure you’re investing in something of quality that is best for your practice. While some products may do the same function, some perform and last better than others simply because of how they were made.

Although “top of the line” dental chairs may cost between $5,000 to $7,000, you may benefit more from buying a used dental chair instead. This is because many used and portable dental chairs are made of more durable materials than many of the mass-produced products on the market now.

Check with the equipment manufacturer regarding warranties, timeliness of repair, difficulty associated with performing minor repairs on site, and the availability of loaner units when necessary repairs are being done. Prior to purchase of a portable unit, ask the vendor for names of previous customers who have purchased a similar unit; contact these individuals to discuss the relative merits and problems of the unit.

Portable dental delivery unit makes it possible for clinicians to provide dental care to patients who are unable to travel to a traditional dental clinic. No ambulatory, homebound, and institutionalized patients benefit greatly when portable dental equipment is used to address their dental treatment needs on-site. Portable dental office equipment is also an option for small dental practices that plan to expand in the future. If you have any question when choosing portable dental unit, you can email us and we can help you determine which equipment is right for you and your practice.

Source:https://www.dentalsalemall.com/article-82–Tips-for-Purchasing-Portable-Dental-Delivery-Unit-with-Compressor-.html

How to Pick the Suitable Dental Portable Unit for Dental Practice

At first it may seem daunting to try and choose between the various brands of self-contained portable dental turbine unit available. Prices can vary widely with some seemingly too good to be true to even higher priced units not always being clear on what and how well they work. The purpose of this article is to simplify the purchase decision and explain some of the mechanical features and what to look for when comparing different models of portable dental units for your office.

Look for these specific features when evaluating a portable dental unit for purchase for office use or portable dentistry:
Vibration – We will start our discussion with one of the most overlooked but important characteristics of evaluating a mobile dental delivery unit. An ideal system will have a powerful compressor and vacuum system, meaning the motors could generate significant vibration.

High Grade Compressor and Vacuum Pumps – Higher quality pumps are made with greater precision and the dynamic balancing of the motors and piston will make them run smoother. This smoother operation is the key to beginning with proper construction to eliminate vibration at its source.

Solid and Robust Construction Materials – Units that have poor construction or use flimsy materials will not handle vibration well and will cause problems. A well-built portable dental unit will be not only constructed of high-grade components, but will have thicker walls and materials. To keep these units lighter yet stronger they should use aluminum or an equivalent type of construction. Be cautious of units that are too small or lightweight to properly absorb vibration.

Suction Performance – One of the most difficult design areas for a mobile dental unit to create, is the powerful suction desired for dental procedures. It needs to provide high flow with moderate strength to pick up debris, capture water coolant effectively and pull viscous solutions through smaller tubings like the saliva ejector or surgical tips.

Suction Canister and Purging Ability – The suction canister should be sized to allow for a standard day of procedures with normal rinsing during treatment. Generally, a good baseline is that the canister should hold around two to three liters of liquid.

Sound Performance – A very common and important question when selecting a portable dental unit for an office is how loud is it? The reason is that many in the dental field have heard how loud inexpensive and poorly designed dental units with air compressors can be. A well-engineered portable dental system should be very quiet and operate under 48 decibels measured right next to the system.

Compressed Air and Headpiece Performance – When evaluating a portable dental unit with compressor, make sure that the internal air compressor provided can produce enough air flow at the right pressure to operate air driven dental turbine headpieces properly. Even electrical dental high speeds use air for cooling and need proper air flow.

Dental Water Supply and Water Line Disinfection – Current requirements are mandating that the water lines in dental delivery units be disinfected to remove the biofilm that can grow inside the small diameter tubings. Tablets and other chemicals can clog or damage portable dental unit components and require consistent management to ensure that the removal of biofilm is obtained.

Amalgam Separation – If you will be using the portable dental unit for restorative procedures such as removing old amalgam fillings, the suction system will need the ability to use an amalgam separator.

We are offering a wide range of high quality portable dental equipment including portable dental chair, dental turbine unit, mobile dental delivery unit and portable folding dental chair. All products are widely demanded by the clients as these are constructed using quality material. If you are interested in our product, you can visit our site: https://www.dentalsalemall.com/

Source:https://www.thebaynet.com/community/art/how-to-select-the-suitable-dental-portable-unit-for-dental-practice.html

How do I benefit from orthodontic treatment?

The benefits of orthodontic treatment include a perfectly straight smile that is healthier, better looking and giving you more self-confidence and better quality of life.

Should you be living or working in Puyallup, WA, you can rely on the professional advice and the top quality orthodontic treatment from the team of Orthodontic Excellence that will offer you an individual treatment plan to achieve the perfect smile.

Famous Faces with Braces

A great number of the most famous faces on the planet have gone or are currently going through orthodontic treatment and are not ashamed of it – because they know it is worth!

Traditional braces vs. Invisalign aligners

What is orthodontics?
The word orthodontics comes from the Greek orthos, meaning “straight, perfect or proper”, and dontos, which means “teeth”.

Orthodontics specializes in treating patients with improper positioning of teeth when the mouth is closed (malocclusion), which results in an improper bite. In addition, orthodontics includes treating and controlling various aspects of facial growth and the shape and development of the jaw.

Do I need Orthodontic treatment?
Only your professional orthodontist can determine whether and how you can benefit from orthodontics, after a thorough examination.

Should you have any of the following, you might be a candidate for orthodontic treatment:

Underbite— where the lower teeth are too far forward or the upper teeth too far back
Open bite— space between the biting surfaces of the front and/or side teeth when the back teeth bite together
Crossbite— when the upper teeth do not come down slightly in front of the lower teeth when biting together normally
Overbite— where the upper front teeth stick out over the lower teeth
Different types of orthodontic braces

Different types of orthodontic braces
Crowding— when there are too many teeth for the dental ridge to accommodate

Reasons for orthodontic treatment (braces) adults & children

The benefits of orthodontic treatment often go beyond the obvious physical changes of an improved bite and straighter teeth; it’s also a great way to improve a person’s overall self-image. While having beautiful straight teeth is important, even more important is the need to alleviate any potential health problems associated with the teeth or jaw. Crooked teeth or jaw problems may contribute to improper cleaning of teeth, leading to tooth decay and, possibly, gum disease or total tooth loss. Orthodontic problems that go untreated can lead to chewing and digestion difficulties, speech impairments, and abnormal wear of tooth surfaces. Over time, excessive strain on gum tissue and the bone that supports the teeth can affect the jaw joints leading to problems such as headaches or face and neck pain.

Different types of orthodontic braces
Breathing or swallowing problems – Mouth breathing can lead to snoring and sleep apnea.
Crossbite – One or more upper teeth bite inside the lower teeth (towards the tongue).
Crowding – Involving extra teeth or malpositioned teeth.
Deep Overbite – The lower front teeth bite into the upper tissue of the upper teeth.
Disfiguring of the face & mouth – Affects the development of the jaw and position of the teeth.
Missing or extra teeth – Due to tooth decay, injuries, or inherited problems.
Overjet (protruding upper teeth) – Upper teeth that protrude beyond normal and are usually associated with a short lower jaw.
Self-image – An attractive smile can boost a person’s self-image and confidence.
Spacing between teeth – Teeth are missing or may be too small or too large.
Speech, chewing or biting problems – Result from improper occlusion and jaw alignment
Underbite (lower jaw protrusion) – Lower jaw is longer than the upper jaw.

Specific to children:

Finger or thumb sucking – These habits can cause protrusion of the upper incisor teeth and constriction of the upper jaw.
Teeth erupting out of position – Can be guided to proper alignment.

The Essential 8 Tips on Using Intraoral Camera

1.Be sure your hand fits comfortably on the wireless intraoral camera while using it. Hold it like a high-speed hand piece, and maneuver it as you would during an exam. If your hand fatigue exists after a short period, the hand piece may be too narrow, forcing you to squeeze rather than lightly grasping.

Dental Wireless Intraoral Camera 5.0 Mega Pixel COMS Image Automatically Focus

2.Make certain any focus adjustment provides an adequate depth of field at all settings. Do your video tour inside the mouth using both “macro” and “normal” settings. If you need to refocus repeatedly, then the depth of field is inadequate for your purposes.

3.Test handle-mounted freeze buttons to ensure easy operation and adequate capture speeds. This feature replaces foot controls to freeze an image, but pressing the button with your index finger causes movement at the tip of the instrument. Movement causes blurred images in units with inadequate capture speeds. Try this for yourself.

4.Check out the umbilical cord where the hand piece and cable attach. Pay special attention to the connection points because these areas are most susceptible to damage under regular use. Common symptoms include fraying of the umbilical or intermittent loss of image as the camera is moved.

5.Ensure that image artifacts (tiny colored spots surrounding shiny areas of the image) are kept to a minimum. These artifacts are illusive and can make images appear sharper than they really are. These colored spots can be annoying over time and may lead to mis-diagnosis.

6.Mount a protective sheath on your test-drive model. Make certain the image quality is maintained since this is standard infection control protocol.

7.Rate the image quality and ease of use in its intended environment…in-office and on your patients. Allow your staffs involvement in the decision making process. They will be using the product as much, if not, more than the dentist.

8.Understand the warranty, and look for a minimum of 1 year parts and labor. Ask about the servicing protocol and how the manufacturer will stand behind their product. Does the company offer a replacement or loaner program? If they don’t, question turnaround time on warranty service and parts availability.

Risks with orthodontic work you should know

Orthodontic treatment isn’t particularly risky, but as with any intervention to your body, it does carry some minor risks.

Whether you’re looking into orthodontic treatment for your child, or you’re considering treatment options as an adult, it’s important to have the information to be able to weigh up the risks and benefits of treatment before making a decision.

Image result for Risks with orthodontic

Toothache and mild discomfort

When you first start treatment, you may feel some mild discomfort as your mouth gets used to the orthodontic equipment and your teeth begin to move. This discomfort will vary from person to person, and will depend on your own pain threshold and the treatment you have chosen.

If you feel any discomfort due to the pressure on your teeth, we recommend taking over-the-counter pain relief.

Scratches and ulcers

At the start of your orthodontic treatment, it’s fairly common to feel some small scratches and ulcers on the inside of your mouth, especially if you’re wearing a fitted device such as braces. This will usually only happen for a couple of days, until your mouth gets used to the shape of your braces.

However this can be easily solved using orthodontic wax, which is an easy and immediate way to protect your mouth during this initial phase.

Gum infection

Maintaining good oral hygiene is important for everyone, but it’s especially important if you’re undergoing any type of orthodontic treatment. Poor oral hygiene can lead to gingivitis and gum infection which can slow down the movement of your teeth – if you’re wearing an orthodontic appliance then this can mean treatment takes longer. In some cases, the infection can cause irreversible damage to the tissues which support your teeth.

Make sure you maintain a healthy oral hygiene routine and follow the guidance of your orthodontist to prevent gum infections. Regular professional cleans with your dentist will also help.

 

Enamel demineralisation

Enamel demineralisation, where the enamel wears away on the tooth, can occur during orthodontic treatment, particularly with fixed appliances such as braces. It is primarily caused by sugar, which starts a decay process in the enamel. If left to progress, over time this demineralisation can lead to cavities and tooth decay, which appears as white or yellow stains on the teeth.

 

Root shortening

For some patients, the length of the roots of their teeth become shorter during treatment. It’s nearly impossible to predict whether or not it will happen to you – but some people are more prone to it than others. In general, root shortening doesn’t have significant consequences, but on very rare occasions it may threaten the longevity of the tooth.

Tooth vitality

As orthodontic treatment moves the teeth, some pre-existing conditions (such as trauma or decay) might be aggravated by wearing an orthodontic appliance. The movement the tooth undergoes during treatment might further aggravate the tooth. While very rare, this can lead to the tooth becoming discoloured or requiring root canal treatment.

Risks and complications in orthodontic treatment

Toothache, occasional discomfort or pressure on the teeth

When beginning orthodontic treatment and after the each inspection, you may feel unpleasant pressure on your teeth, toothache, or just discomfort. It depends on the individual and on their pain threshold.
Scratches and bruises

White spots on the surface of the teeth

This complication is caused by long-term bad oral hygiene. White patches appear around the brackets. The enamel beneath the brackets remains undamaged. A coating built up on the surface of the enamel causes demineralisation. This occurs due to harmful bacteria which break down leftover food around the brackets into acids. The acids eat into the enamel resulting in demineralisation.

Image result for risks of orthodontic treatment

This is a stage preceding tooth decay.

If this complication arises and repeated instruction on oral hygiene and visits to a dental hygienist have no effect, the doctor reserves the right to premature termination of treatment. The priority is a healthy set of teeth and only afterwards a straight set.

Gum infection – gingivitis

Insufficient oral hygiene can lead to gum infection. This infection can complicate treatment by meaning slower tooth movement and so treatment is slowed and sometimes leads to irreversible damage to the teeth’s supporting tissues.
Tooth root resorption
Some patients have a tendency to the occurrence of resorption. In practice this means that the teeth’s roots get shorter. This complication however does not shorten the lifespan of teeth.

Relapse of orthodontic defects
Every orthodontic treatment has a tendency to relapse, i.e. the teeth return to their original position. We prevent this by using retention devices and retainers. Retention devices are laboratory products made to fit your teeth exactly.

Retainers are wires which are stuck to the back surface of your teeth to maintain their position. This phase is very important for orthodontic treatment.

Risk Factors in Dental Implant Surgery

This article is the second in a series for Oral Health. The first article was published in the August 2015 issue, with the title “Surgical Risk Factors in Implant Dentistry: Influence on Failures and Bone Loss”. Table 1 in this article, organizes risk factors in implant dentistry into four categories. These were introduced in the August 2015 article together with the concept of “Evidence Based Dentistry” and a representative case presentation.

Image result for Implant Dentistry

Patient Related Systemic Risk factors: (Table 1)
This category of risk factors includes but is not limited to patient related: a) complaints, expectations, psychological suitability and limitations (e.g. clinical limitations and financial limitations), b) history of periodontitis (especially aggressive periodontitis) and c) smoking, systemic disease and medications.

• b) History of Periodontitis:
A patient’s history of periodontitis and in particular aggressive periodontitis needs to be determined from the information gathered from both the initial patient interview, previous dental records as well as from the diagnostic information gathering phase. There have been several articles studying this issue. Readers are referred to a meta-analysis published in 2014.1 A conclusion can be drawn from this review that a history of aggressive periodontitis poses a negative risk factor for and should be taken into account and included as part of the “informed consent” process and treatment.

• c) Smoking, Systemic Disease and Medications:
The patient’s dental, medical and habit history and in particular current conditions that could impact upon the outcome, need to be questioned and evaluated at the initial patient interview and where indicated investigated in more detail. Outside consultations may be needed to determine if any pre-treatment precautions need to be taken or if treatment is absolutely contra-indicated.

Patient Informed Consent
Successfully achieving “patient informed consent” is a critically important aspect of overall patient care. It is a legal and ethical duty for dentists to make sure that the patient understands the important aspects of treatment. There have been several recent RCDSO Dispatch articles that have addressed this issue, for example “Dental Implant lawsuits”, August/September 2015 issue, “Informed Consent Learning program”, November/December 2015 issue and “Informed Consent From
Material Risks to Material Information”, February/March 2016 issue.

Short Term Complications With Dental Implants

Short term failure is best described as those failures that occur before the final teeth are made. It could be immediately following the surgery , during the first few months of healing or even a year later.

dental implant patient

1. Infection and Poor Healing
Placing an implant is a surgical procedure. Provided the dentist follows aseptic/sterile surgical techniques and precautions the chance of infection is extremely low, even when we consider we are working within the mouth which is full of bacteria. Patients are generally covered with antibiotics as an added precaution. Discomfort following surgery is usually mild to moderate and lasts for 1-4 days on average, and of course depends on the specific procedure being done. Make sure to ask your dentist what is a normal expectation for yourself.

2. Medical Condition Affecting Healing
Generally speaking, if you have lost teeth, you are a potential candidate for dental implant surgery. However, there are certain conditions and diseases that can affect whether dental implants are right for you – this is where the importance of a proper medical assessment comes in.

3. Surgical Technique
A skilled dental surgeon will know the osseo-integration process (how the dental implant anchors to the jaw bone) and be skilled in proper surgical techniques. In those cases healing is often very comfortable and uneventful. If not, the site is more prone to swelling, pain, infection and possible failure of the implant. This becomes more critical if the area is slightly deficient in bone volume or is very dense….overheating of the bone will cause necrosis (bone death) and the implant will likely fail to integrate.

4. Micromovement of the Dental Implant
Dental implants must remain immobile for a long enough period to allow osseo-integration to occur. The analogy I give my patients is similar to when we break a bone in our arm or leg. The fracture is immobilized by use of a cast because if there is movement the bony fracture will not heal. Implants are very similar.