Four Reasons Why You Should Avoid Ozone Generator Air Purifier

Not only is ozone potentially dangerous to your health, it may not even work at all. Below are four reasons why you should never use an air purifier that produces ozone.

  1. Ozone Generators May Not Work at All
    Some manufacturers suggest that ozone will render nearly every chemical contaminant in the home harmless by producing a chemical reaction. This is incredibly misleading because a thorough review of scientific research has shown that in order for many of the dangerous chemicals found indoors to be eliminated the chemical reaction process may take months or even years.
3500mg/h Ozone Generator Ozone Machine Purifier Air Cleaner Disinfection Clean
3500mg/h Ozone Generator Ozone Machine Purifier Air Cleaner Disinfection Clean
  1. The Chemical Reaction Can Be Dangerous
    Even if ozone generators were proven to be effective at eliminating these chemicals, there are certain side effects everyone must be aware of. Many of the chemicals ozone reacts to results in a variety of harmful by-products. For example, when ozone was mixed with chemicals from new carpet in a laboratory setting, the ozone reduced many of the chemicals but created a variety of dangerous organic chemicals in the air. While the target chemicals were reduced, the dangerous byproducts rendered the process moved.
  2. Ozone Generators Do Not Remove Particulates
    A third factor to consider when looking at ozone generators is that they do not remove particulates such as dust or pollen from the air. This includes the particles which are primarily responsible for allergic reactions. To combat this, some ozone generators include an ionizer which disperses negatively charged ions into the air. In recent analysis’s, this process was found to be less competent in the removal of air-borne molecules of dust, smoke, pollen, and mold spores than HEPA filters and electrostatic precipitators.
  3. It Is Impossible to Predict Exposure Levels
    The EPA notes that it is increasingly difficult to determine the actual concentration of ozone produced by an ozone generator because so many different factors come into play. Concentrations will be higher if more powerful devices used in smaller spaces. Whether or not the interior doors are closed rather than open will affect concentrations as well.

Different peoples have different ideas, in facet Ozone Generator Air Purifier can effectively eliminates virtually cigarette/cigar smoke, pet odors, paint/cleaning fumes, dust, water damage, smoke damage, cooking odors, and other air borne irritants.

The Difference Between a Sterilizer and an Autoclave

A dental sterilizer is any piece of equipment that is used to destroy all living organisms within the chamber through the use of specifically programmed sterilization cycles. By definition, Webster’s defines a sterilizer as a piece of equipment used to destroy microorganisms in or on, usually by bringing to a high temperature with steam, dry heat, or boiling liquid. However, there are a broad range of processes used for sterilizing:

Global Dental Sterilization Instruments Market 2020 Hu-Friedy ...
The Difference Between a Sterilizer and an Autoclave

Dry Heat Sterilization
Gas/Chemical Sterilization
Glass Bead Sterilization
Steam Sterilization
Sterilization With Ultraviolet Radiation

While many say that sterilizers and autoclaves are synonymous, they are more like a tree-sterilizers are the trunk that autoclaves branch out from. A sterilizer is a general term for any equipment that can sterilize.

An autoclave sterilizer is a specific device that sterilizes equipment. The name is a combination of two ancient words: auto- which is Greek for self, and clave-which is Latin for key. When combined the two words mean “self-locking”.

One of the things that sets steam autoclaves apart from other sterilizers is this automatic lock feature. Since an autoclave is a sterilizer, its purpose is like sterilizers-to kill or remove all forms of life on an object’s surface such as bacteria, fungi, viruses, and spores. While autoclaves solely utilize steam to disinfect, sterilizers can use chemicals, high pressure, filtration, irritation, or a combination of these methods to eliminate living organisms.

Not all sterilizers can be autoclaves sterilizers because not every device can withstand the high temperatures needed to kill every organism. If someone was to use a different type of equipment the material could melt and morph making it unusable.

If you are have any problem in choosing dental equipment such as dental face shield and dental safety goggles, you can feel free to contact our customer service.

The most important points when choosing a endodontic motor

FAQ of UV Sterilization Machine Application

How Can UV be Utilized?
Beyond water and surface sterilization, UV can be used as a sterilization technique for other types of disinfection. UV can disinfect the air in isolated spaces, which is particularly beneficial in a hospital setting. Installing UV devices like lamps and lights at the top of rooms and other areas of circulation can disinfect the air as it moves, improving both the air quality and the effectiveness of the UV sterilization.

2020 New Air Purification System UVC Portable Disinfection Lamp With Ozone UV Lamp Ultraviolet Germicidal Light

Air Purification System UVC Portable Disinfection Lamp With Ozone UV Lamp Ultraviolet Germicidal Light

What Type of UV Light is Best?
Most UV sterilization devices such as UV sterilizer cabinet use UV-C light as the source of their disinfecting power. UV-C light is an effective solution for sterilization, which is why it is the most widely used light type. However, it can cause some serious damage as well. UV-C light can penetrate human skin and cause damage or injury to the person using it, if not careful. UV-C light can also cause damage to certain plastics and rubber materials over time.

Where Can UV be Used?
While UV sterilization can be used as a supplemental infection control strategy for almost any situation, such as disinfecting water and work surfaces as mentioned above, the efficiency of the sterilization make other specialized spaces accessible as well.

Why Use UV Sterilization?
UV sterilization is not a new technology, having been discovered in 1879. Discovered to be a useful technology for cleaning infectious spaces, more studies were done to determine the exact beneficial nature of UV for sterilization purposes. Since the 20th century, UV sterilization has been used to disinfect things like water and work surfaces. UV light is a shorter wavelength than visible light, and is able to penetrate and destroy the bodies of viruses and bacteria.

When picking the right UV sterilizing device, the type of light used in the device is the most important factor in determining which device is the right one for your project. Because of its increased efficiency and improved safety, a device like the Far-UV Sterilray™ can be an incredible tool for sterilization and disinfection. For more information about the Far-UV Sterilray™, click the link for our Far-UV Sterilray™ fact sheet.If you are have any problem in choosing sterilization equipment such as dental autoclave sterilizer and dental dry heat sterilizer, you can feel free to contact our customer service.

The most important points when choosing a endodontic motor
Some Basic Knowledge of Dental Handpiece You Should Know

Why does rotary endo obturation system is better?

Currently, there are several rotary endodontic obturation systems in the dental market and all designed with one specific goal in mind – to clean and shape the canal(s). However, several research studies have illustrated that regardless of the type of file used to shape the canal, none are able to contact all the canal walls or surfaces.

YUSENDENT COXO Dental Endo Gutta Percha Obturation Endodontic C Fill Gun CE

YUSENDENT COXO Dental Endo Gutta Percha Obturation Endodontic C Fill Gun CE

Files are generally categorized as:
Radial-ended files
Enable cleaning and shaping but the procedure is slower and safer
Examples include: Profile & K3
Non-radial-ended files
Cut more effectively but can also lead to errors if not properly managed
Examples include: ProTaper, Twisted Files, Endosequence
The most important factor when choosing and utilizing a particular file system is to follow the appropriate technique outlined by the manufacturer and dictated by the design of the file to remove vital or necrotic tissues from the canal spaces. This will optimize the files’ efficiency and minimize damage to the canal and tooth.

Each file system has advantages and disadvantages; the best system is the one you are proficient with and used to handling.

Additionally, clinicians must adhere to the principles of endodontic treatment:
Completely remove infected material from the canal space
Ensure there is a glide-path before using rotary files
Preserve tooth structure while reducing the risk of vertical root fracture in the future
Manage the apical preparation of the canal to avoid transportation or unnecessary enlargement
Carefully clean and shape the canals in furcation areas to decrease furcation involvement
With respect to obturation, there are 3 techniques that are employed.

  1. Warm Vertical Condensation
    This is the most commonly used technique in North America. Nowadays, there are several techniques which originated from the classic Schilder’s technique. (3) This technique requires clinicians to use a heat carrier (e.g. Touch n’ heat; Calamus Duo; Elements, Super Endo α2) as well as injectable gutta-percha (e.g. Obtura II, Calamus, Super Endo β)
  2. Carrier-based techniques
    This is a popular option used to fill canal spaces. Different carrier-based systems use different core materials to deliver gutta-percha to the canals. Currently, carriers made of cross-linked gutta-percha such as Gutta-Core (Tulsa/Dentsply) are available which may be easier to remove from the canal in situations where retreatment is necessary.
  3. Lateral condensation
    In this technique, gutta-percha cones are placed within the canal and finger spreaders are used to place filling material and pack the canal space. There is an increased possibility of vertical root fracture using this procedure if excessive pressure is applied against the canal walls.

At this time, there is no scientific evidence to suggest whether one system is more advantageous over another.

See more:https://www.dentalsalemall.com/category-80-b0-Endo-Equipment.html

How to choose a dental autoclave sterilizer for your dental practice

How to clean dental autoclave in a short time

What should take into consideration when choosing dental xray unit

Also consider the company from which you are buying the equipment. You should choose a company that is experienced in dental X-ray equipment, that can answer your questions, and that can guide you through the process. If you decide to buy certified pre-owned equipment, you may also want to choose a company that may trade-in used equipment that they sell. That way, when you are ready to upgrade in the future, you can continue to use that company.

BLX-5 Portable Dental Digital Handheld Portable X-Ray Machine System

X-ray tube specifications – the main ones are as follows: anode heat storage capacity (directly affects the system’s effectiveness) and focal spot sizes (the smaller the X-ray tube focal spot size, the clearer the image).

• The generator type and power capacity – high-frequency X-ray generators are preferable since they increase X-ray tube operating life providing maximum safety for patients. Taking the generator power capacity into consideration, you should also remember about the X-ray machine type: portable devices’ standard power capacity may be 3, 6, 15, or 30 kW; stationary X-ray machines’ power capacity range on average from 40 kW to 80 kW. Moreover, the more powerful the generator is, the less exposure time it takes, and consequently, the less radiation patients are exposed to. The Philips Practix Convenio portable dental X-ray unit system with 30 kW power capacity and the Siemens Axiom Luminos TF Eco stationary X-ray machine with 65 kW power capacity are excellent options of respective types.

• X-ray tube mounting types – stationary machines have two mounting options: floor-mounted and ceiling-mounted X-ray tubes. Floor-mounted ones are certainly cheaper to install, and do not require specific room dimensions. But if you expect a large patient stream, it would be best to devote some more funds and purchase the ceiling-mounted X-ray tube because it is more reliable and much easier to use. Siemens Multix Top may be regarded as a desktop X-ray machine.

• An X-ray table is an essential part for any stationary machine. There are tables with either fixed or adjustable height. If the table can move vertically, it’s possible to adapt the X-ray system to examine patients with restricted movement capabilities, as well as for patients with serious medical conditions. The maximum load on the X-ray table is an equally important feature. Most systems allow examining patients with a body weight of up to 200 kilograms. However, some manufacturers produce machines with X-ray tables withstanding even 290 kilograms load and higher.

After having practiced dentistry for nearly four decades, I have seen many new types of materials and equipment come to market. I have personally experienced the old adage, “you live and you learn.” Digital radiography is one of my recent discoveries. After having seen the advantages it offers, I wish I had switched years ago.
If you’re new to digital radiography, you might not be sure about where to start when choosing a system to purchase. Here are four things to consider if you’re thinking about making the investment.

Tips on How to Choosing Dental Digital Xray Machine

What to Look for in a Dental Chair?

To ensure the success of your practice, your dental chairs unit should be: comfortable for you, your team, and your patients; functional and reliable; and complementary to your office decor.

TJ®TJ2688-A1 Controlled Integral Dental Chair Unit
TJ®TJ2688-A1 Controlled Integral Dental Chair Unit

For the patient, the chair should offer good support and cushioning regardless of their size. Some chairs are designed to sync with the patient’s body when the chair is lowered or raised to eliminate repositioning. Look for headrests with adjustable positioning, especially if your practice includes children. Extras include built-in massagers and heating units.

And don’t forget armrests that can be moved to allow the patient ease of entry and egress.

For you, the chair should get your patients close enough that you can perform your procedures, but still allow you to maintain a healthy posture. Also consider the width of the chair’s back. Wide back chairs provide more comfort to your patients, but they can make it more difficult for you to access them. A dental chair with a narrower back can make your job easier, so find a chair with a width that works for you.

Your chair should also have mechanical chair positioning capability to allow you to achieve the best access to the patient.

Functionality
A smart, modern-looking dental chair will inspire confidence in your patients and improve your effectiveness. Today’s chairs offer several technological features, including options such as:

Control panel with easily accessible buttons or a touchscreen to adjust chair position, operatory accessories, and the speed of the lifting and lowering of the chair.

If you need other dental equipment such as mobile dental delivery unit, please free to contact us.

The Role of Suction in Dentistry

Tax benefits of dental equipment purchases

Do you know your Dental Chair parts?

There are various parts to a dental chair that makes it an effective and indispensable tool in a dental practice. These parts are seen in the body features considered under here;

TUOJIAN® Complete Dental Chair

Air compressor
Dental air compressors for sale are a very essential item of any dental clinic and dental surgical practice. They are critical to the consistent working of your dental clinic. They are at the center of dental practice. The machine simply compresses, dries, cleans, and retains air, which powers handpieces and particular activities of dental clinic and hand-piece cleaners.

Dental handpiece

Also referred to as dental drill, the dental handpiece for sale is some instrument held in hand to carry out a number of general dental processes, which includes getting off decay, polishing fillings, and altering prostheses. The handpiece on its own has some interior mechanical parts that initiate a rotational power and offer energy to the cutting tool, oftentimes a dental burr. The sort of tool employed technically would differ having to do with the needed function called for by the dental process. It is general for a light source and some cooling water-spray setup to be integrated into particular drills. That greatly enhances the precision, visibility and the general success of the process.

Dental X-ray Machine
This is often referred to as dental radiographs. And dentists employ radiographs for many reasons – to discover concealed dental structures, benign and malignant weights, loss of bone, and cavities. A radiographic image is created by some regulated burst of X-ray radiation that intensifies oral setups at diverse stages, all based on the different anatomical densities, prior to striking the sensor or film.

Dental Cabinet

The cabinetry of your dental chair possesses some greater efficiency and impact on every other thing from efficiency of patient’s privacy to their ergonomics in the operatory – all of which affect your capability to develop your business. Installing your cabinet takes some particular configurations;

Central – this assists many operatories with a deluxe cabinetry resolution. It is proper for your exposed concept layout, or some manageable use of room.

Rear – this is a smart way for littler office rooms, cabinetry units stationed at the 12 o’clock position usually feature helpful supplement shelves.

Side – This is present in delivery or storage modes, by-the-way cabinetry units are manufactured with some workflow enhancement in mind.

Upper – this configuration keep necessaries away from your countertops and securely away in higher cabinetry units.

The Noise Comparison of Pendant Motor and Electronic Micromotors

What to Look for in a Quality Dental Chair Unit

How to perfect dental led surgical light in your dental Clinic

Have you considered the effect that lighting can have on the atmosphere in your practice? A simple and cost-effective feature that’s often overlooked in dental interior design, dental office lighting can help you set the scene to create a positive and welcoming environment, making a significant difference to how your practice is perceived. Let’s take a look at some techniques that you can use to perfect the lighting in your dental practice.

KWS® 36W Wall-mounted Dental Oral Led Surgical Lights KD-202D-3B US STOCK
KWS® 36W Wall-mounted Dental Oral Led Surgical Lights KD-202D-3B

Practical lighting
First and foremost, lighting exists for practical reasons: to help us see what we’re doing. In a dental practice, lighting is particularly important due to the nature of the job. But all too often, catering to practicalities alone results in harsh, fluorescent lighting that can create a cold and clinical environment throughout the practice, which may not show off your dental practice interior in its best light.

Aim to fulfil your practical oral surgery lights needs within your consulting room, without overdoing the lighting in other areas of the practice; patients and staff alike respond better to their environments when the lighting isn’t a uniform brightness throughout the building. Where bright lighting is needed, consider LED lighting over old-style fluorescent fittings; they’re more energy efficient and will save you money in the long run. In bathroom areas, consider motion sensors that only activate the lights when the room is occupied.

Aesthetic effects
Lighting doesn’t have to be purely functional; indeed, by experimenting with different lighting effects, you can dramatically change the mood within your surgery. By diffusing the light using shades and uplighters, you can create highlights and shadows in different parts of the room, which makes for a more aesthetically pleasing environment. Spotlights can be used to focus the attention on particular parts of the room, such as the reception desk.

Create a relaxing waiting area with Wall-mounted Dental Light , table and floor lamps, which will all contribute to a cosy, home-from-home atmosphere. Wall lights are also useful for highlighting artwork on the walls. Choose brighter lighting accompanied by good signage in corridors.

Natural light
Whatever types of electric lighting you are using in your dental practice, there’s no substitute for natural light. Studies have shown that exposure to natural light affects our productivity and mental wellbeing at work. For patients, natural light can help create a relaxing atmosphere which can play a part in reducing anxiety.

In part, your access to natural light will depend on the layout and orientation of your building, but you can also arrange your dental practice layout to maximise natural light wherever possible. Glass doors and skylights can increase the amount of daylight that permeates the building, while removing curtains and blinds from windows, and rearranging furniture so that it does not obstruct light sources can be very effective. Natural light bulbs may be worth considering in a completely windowless environment.

Do You Know How does a dental unit work?

How To Choose Surgical Light

Tips on Choosing a right Led Dental whitening Machine

The use of a led dental whitening lamp is one of the many methods available to whiten teeth, but is it the most effective? Or even the most durable? And how do you know if you are making the right choice when buying a whitening lamp for your dental practice? Sometimes it may be hard to read the specifications and make a choice when everything seems to offer the same features. Do you know what are the most important settings you are looking for when choosing a whitening lamp?

Do I need a whitening lamp?

Dental whitening products are effective after a number of uses and can last a few weeks, and as you know a teeth whitening lamp speeds up treatment by much, leading to a similar or even better result with a much faster process. These lamps can be used to accelerate the bleaching process by accompanying specific products in the treatment.

Their function is simple, the specific light has a direct effect on the patient’s teeth, on which a whitening agent is applied, so that after a certain number of sessions of a few minutes each, depending on the lamp you choose, the agent has had more than one process completed.

The features of the perfect whitening lamp:

The quality of a lamp is often reflected in the range of options to control the whitening of each patient’s teeth.

But there are other parameters that differentiate whitening lamps:

These dental whitening machines exist in several sizes, several weights, and several hanging modes. Most of them also have casters. We will focus on the practicality of the arm joints and the comfort with which we will be able to use the device without feeling overwhelmed.

Functions for adjusting operating times, color change and exposure power are available on some whitening lamps to best adapt the procedure to each patient.

The number of colors projected by the LED increases the wavelength covered by the device, making it possible to treat patients more or less effectively depending on their sensitivity.

A lamp equipped with a ventilator will provide better comfort to the patient but is likely to emit an annoying noise, unless the ventilator is optimized not to emit sound.

The heat production of the device must be reasonable to avoid any sensitization of the patient’s teeth.

It is up to you to choose a product according to these characteristics and the demands of your patients.

Source:
https://www.icytales.com/tips-on-choosing-a-right-led-dental-whitening-machine/

Factors to Consider Before Choosing a Class B Autoclave

As we have seen, for our dental clinic, we will need a Class B autoclave that allows us to sterilize instruments such as turbines or bagged contra-angles 1:5 multiplier. However, when choosing one or the other model, we must take into account the following points:

Sun® SUN-II-DL Dental Autoclave Sterilizer Vacuum Steam 18-23L
SUN-II-DL 23l

Capacity of the autoclave: Class B autoclaves are manufactured with different capacities, ranging from 8 liters to 24 liters. The more capacity the autoclave has, the more instruments we can sterilize in each cycle, but the more energy it spends in each sterilization cycle. The price of the autoclave will also be proportional to its capacity. Therefore, we must adjust the autoclave’s capacity to our needs, as it makes no sense to purchase an autoclave of much greater capacity than we really need. This will save us money on the purchase and daily use. In addition, it is often more convenient to have two autoclaves smaller than a larger, because in this way we can perform two simultaneous sterilization cycles.


Duration of the sterilization cycle: It is always practical to look at how long it takes for each autoclave to perform a complete sterilization cycle. There are quick-cycle autoclaves, which saves time in autoclaving processes, although the price is usually a bit higher.


Warranty and Technical Service: Another important point to consider when choosing a dental autoclave is warranty and technical service. The vast majority of autoclaves have a warranty of one to two years, and if the autoclave brand does not have its own technical service, the most appropriate thing will be to look for a trustworthy multibrand technical service that can repair it. if one day we need it. Another benefit of having two autoclaves in the dental clinic will be that we will always have an autoclave available if we have to repair one of the two
Autoclave Price: The price of the autoclave will normally be closely related to its reliability and characteristics. European or American brands usually offer high quality autoclaves, while Chinese or Korean brands offer economical autoclaves of a quality that may be sufficient for a small dental clinic. The main disadvantage of these “cheap dental autoclaves” is that the technical service and after-sales service will surely be less advantageous and more complicated
Accessories: Class B autoclaves can incorporate accessories that will be very useful in some cases. For example, there are autoclaves with printers, which will facilitate the traceability of sterilized products.

What should take into consideration when choosing a dental autoclave?

How to choose dental micro motor fit for your clinic?